50+ How to tap a keg design

How To Tap A Keg. You tap a commercial style keg by using a keg coupler. Service is just a click or call away! Consult with our experts to begin designing your new draft beverage system today. And as a bonus, co2 can keep your unfinished keg cool for days even weeks at a time.

With consistently good pressure, the beer can be drawn via the beer line attached inside the draught keg. All you have to do is tap and pour cold, fresh, quality heineken to share with your friends. If the keg is significantly taller than the bucket, wrap the keg in a garbage bag, then fill the bag with ice so you can fully cover everything. One important piece of research before you plan to tap a keg: Use this time to ice the tap. Oh, and don’t forget to ice your tap and beer.

So it will work with any size, type or amount of kegs, and doesn�t run electricity constantly, which saves you money.

All you do is attach it to the keg and pour yourself a nice draught brew Rotate the tap clockwise, threading the tap into the keg. Line the notches up with the hole at the top of the keg. Pressurized gas (either co2 or nitrogen depending on the type of beer being dispensed) flows into the side of the keg coupler through an air line and the beer flows out through a beer line attached to. A co2 pump, on the other hand, is nice and clean, reducing any risk of a low quality tasting beer to zero. You still may be able to enjoy the contents of your keg rather than just.