How To Install Direct Wire Under Cabinet Led Lighting. Reconnect the original wires to the appropriate outlet screws and tighten all. 1312021 Use pliers to create hooks on the exposed wire ends. Pull the cable through the knockout holes in the fixture body and secure the cable with a cable clamp. 7192019 Drill 1-18 in.
Make sure that the sheathing is in the clamp and not the individual wires. 6212017 Fish the wires up through the hole and into the corner of the cabinet. Twist together the two stripped positive wires and secure them with low-voltage wiring nuts. Ad Get Instant Quality Info Now. Reconnect the original wires to the appropriate outlet screws and tighten all. Holes through the cabinet sides and run 12-in.
Follow the manufacturers instructions and disassemble each fixture necessary for the installation.
Flex for each light or group of lights for the switch and for the power Photo 4 and Figure A. Measure cut and add extensions to enough LED tape to cover the underside of the cabinet above the sink. 7192019 Drill 1-18 in. Allow an extra 6 in. Pull the cable through the knockout holes in the fixture body and secure the cable with a cable clamp. Follow the manufacturers instructions and disassemble each fixture necessary for the installation.