17
Jan
How To Add More Lighting To A Room Without Wiring. Turn off power supply to work area. Check that there is no power running through the wires with a circuit tester. It helps to have another person to catch the wire as you feed it vertically from the attic or crawl space. Planning ahead is the key to getting the lights in the right spot.
Sometimes ceiling lights arent where you want them to be. Prepare the cable route for the spur from the junction box to the new lighting point using 1mm 2 two-core-and-earth spur cable. 9172018 Purchase lights that can be plugged into each other so that your design can flow. 582020 The easiest solution for no overhead lighting is to leverage the windows you already have in your apartment. Find an existing power sourceoutlet. 5112016 6 Feed the junction box and the arm of the light fixture into the ceiling hole.
Then drill a 34-inch hole in the top or bottom plate of the wall directly over or under each one of the openings.
Tips to enhance your lighting solution. If the existing cable is installed in conduit or a hollow wall it should be easy to pull a new cable in without damaging the wall. 11212010 Turn off all power supply to the room in which you will be working. Decide what you want to accomplish with the lights. Opening up your windows and balcony door can also draw in the sunlight and fresh air. Then drill a 34-inch hole in the top or bottom plate of the wall directly over or under each one of the openings.
